Marine Project provides dedicated Albosan Makina generator maintenance, cooling system descaling, and mobile repair services throughout Montenegro and the Adriatic region, responding directly to unexpected failures or noise complaints at your berth. Our experienced marine technicians deploy rapidly to your vessel’s location, performing on-site diagnostics and component-level repairs to restore silent, stable electrical output from your Kubota-powered Albo generator.

We combine factory-level technical knowledge with practical field experience, ensuring every service—from heat exchanger cleaning to injector calibration and control system troubleshooting—delivers measurable performance gains. This mobile capability eliminates towing costs and yard waiting times, while our preventive maintenance protocols extend component life and reduce the risk of recurring faults. You gain dependable power availability, reduced port noise disturbances, and a transparent service record for warranty and insurance purposes. Schedule a generator health check and receive a full condition report within 24 hours of our team’s arrival.

Marine Project provides expert service for Alfa Laval plate heat exchangers and marine separators across Montenegro and the Adriatic, directly resolving compromised heat exchanger efficiency, temperature alarms, and separator performance drops at your berth or yard. Our highly experienced technicians perform complete dockside maintenance including chemical decalcification and descaling, plate pack disassembly, inspection, and re-gasketing with genuine Alfa Laval gaskets, frame tightening torque verification, and high-pressure testing to factory specifications, all executed on board without removing large heat exchanger assemblies or interrupting connected engine circuits.

We carry Alfa Laval-specific gasket kits, plates, and separator bowl components, enabling most interventions to be completed within a single site visit while avoiding workshop transport, crane lifts, and extended engine downtime. This mobile approach restores optimal heat transfer and fuel/oil separation efficiency, while our post-service thermal and pressure tests validate operating temperatures, flow rates, and leak integrity under full load. Each service includes a detailed plate condition log, tightening torque chart, and a preventive maintenance schedule for chemical cleaning intervals and gasket life assessment. Schedule a heat exchanger and separator audit and our team will provide an on-site technician and fixed-price repair quote within 48 hours of onboard inspection.

Marine Project provides comprehensive service, repair, and water treatment solutions for Aquatec watermakers on superyachts with a mobile team delivering direct onboard assistance at your berth. Their certified technicians handle all Aquatec models, offering preventive maintenance, diagnostics, membrane cleaning, and full system overhauls using genuine components and manufacturer-approved methods. Available 24/7 for emergency support, Marine Project guarantees reliable freshwater production, energy-efficient operation, and consistent water quality for every voyage.

Marine Project delivers expert AS LABRUNA s.r.l. marine generator troubleshooting, routine maintenance, and emergency dockside repairs across Montenegro and the Adriatic, directly resolving auxiliary power drops and control panel alerts while at anchor or at berth. Our specialized engineers perform comprehensive diagnostics for traditional diesel GenSets and advanced hybrid setups, executing electronic control unit recalibration, alternator excitation testing, fuel injection system verification, cooling circuit pressure checks, and protective relay adjustments using AS LABRUNA-specific diagnostic interfaces and genuine service parts.

We carry a comprehensive inventory of AS LABRUNA components including sensors, control boards, injectors, and voltage regulators, enabling most interventions to be completed within a single mobilization without generator removal or workshop transport. This dockside approach reduces auxiliary power downtime and eliminates haul-out costs, while our load-bank tests validate voltage and frequency stability, automatic start/stop sequencing, and alarm functionality under full-rated demand. Each service includes a detailed fault-log report, performance curve, and a scheduled maintenance roadmap for filter changes, impeller replacements, and coolant testing. Schedule an AS LABRUNA generator assessment and our team will provide an on-site technician and fixed-price repair quote within 24 hours of your call.

Marine Project ensures your B&G navigation systems operate flawlessly across Montenegro and the Adriatic, delivering expert dockside troubleshooting, installation, and sea-trial calibration directly at your berth or yard for chartplotters, Triton2 displays, H5000 sensor suites, and Precision-9 autopilots. Our certified technicians perform full system diagnostics including NMEA 2000 network verification, wind and speed sensor calibration, compass deviation adjustment, and autopilot drive response tuning using B&G-specific software and test equipment, without removing units from your helm or mast.

We carry B&G-specified cables, sensors, keypads, and autopilot drive components, enabling rapid restoration of full sailing electronics functionality within a single mobilization while avoiding shipping delays and third-party workshop handling. This mobile service reduces system downtime and eliminates unnecessary disassembly, while our post-repair sea-trial validates true wind angle/direction, boat speed, depth accuracy, and autopilot steering performance under real sailing conditions. Each service includes a full system configuration backup, calibration certificate, and firmware version documentation for survey and racing compliance. Arrange a B&G electronics audit and our team will provide an on-site technician and fixed-price repair proposal within 24 hours of your call.

Marine Project provides expert service for Besenzoni hydraulic systems across Montenegro and the Adriatic, directly resolving fluid leaks, movement stalls, and imprecise control on gangways, swim ladders, and passarelles at your berth or yard. Our technicians perform mobile dockside support including hydraulic cylinder resealing with genuine Besenzoni kits, power pack pressure and flow adjustments, hose and fitting replacement, and wireless remote control diagnostics, all executed on board without removing structural components or disrupting deck layouts.

We carry Besenzoni-specific seals, hoses, fittings, and remote control transmitters, enabling most interventions to be completed within a single site visit while avoiding crane lifts, transport logistics, and workshop delays. This mobile approach reduces equipment downtime and eliminates haul-out costs, while our load tests verify extension/retraction timing, holding pressure under static load, and smooth articulation throughout full range of motion. Each service includes a detailed hydraulic oil analysis, operating pressure log, and a preventive maintenance schedule for fluid changes, seal inspections, and remote battery replacement. Arrange a Besenzoni system assessment and our team will provide an on-site technician and fixed-price repair quote within 48 hours of onboard inspection.

We Provide Yacht Caterpillar engine overhauls and the importance of maintenance for reliable performance and emergency repairs. Caterpillar Marine (official dealer support) specialists execute complete engine overhauls, scheduled maintenance, and emergency repairs for all marine propulsion systems directly at your berth or anchorage. Available 24/7, we deliver advanced engine diagnostics, fuel-system servicing, and full rebuilds including cylinder heads, pistons, and crankshaft components. Every procedure follows CAT factory specifications using genuine parts and calibrated test stands, restoring rated horsepower and extending service intervals with guaranteed reliability.

Marine Project provides expert service for Caterpillar marine engines across Montenegro and the Adriatic, directly resolving propulsion trouble and ensuring optimal performance for C-series (C18, C32) and 3500 Series powerplants at your berth or yard. Our certified technicians perform ADEM electronic diagnostics, fuel injection system calibration, turbocharger balancing, cooling circuit pressure testing, and full in-situ overhauls of cylinder heads, liners, and bearing assemblies using Cat-specified tools, ET diagnostic software, and genuine parts without removing engines from their mountings.

We carry a substantial inventory of Caterpillar service components including sensors, injectors, gasket kits, and electronic control modules, enabling major interventions to be executed on-site while eliminating crane lifts, transport logistics, and extended yard stays. This mobile approach reduces propulsion downtime and preserves factory warranties, while our post-overhaul sea-trial and load-bank testing validate rated horsepower, torque delivery, and fuel efficiency against Caterpillar acceptance standards. Each service concludes with a comprehensive performance report, wear measurement log, and a predictive maintenance schedule for critical components including aftercoolers, seawater pumps, and fuel filters. Contact our team for a Caterpillar propulsion assessment, and we will provide a detailed scope of work and fixed-price proposal within 72 hours of onboard inspection.

Marine Project provides expert service for CMC Marine stabilizers and thrusters across Montenegro and the Adriatic, directly resolving vessel rolling at anchor, fault codes on Stabilis Electra fins, and electric thruster response issues at your berth or yard. Our specialized engineering team performs rapid dockside care including fin actuator diagnostics, electric motor winding and encoder testing, drive belt and gearbox inspections, electronic control module recalibration, and power supply verification using CMC-specific interfaces and genuine service parts, all executed on board without removing fins or thruster units.

We carry CMC Marine-specific components including actuators, encoders, drive belts, and control boards, enabling most interventions to be completed within a single site visit while avoiding dry-docking, crane lifts, and transport logistics. This mobile approach reduces vessel immobility and eliminates haul-out costs, while our post-service sea-trial validates fin response times, roll reduction performance, and thruster thrust output across all operating modes. Each service includes a detailed fault-log report, calibration log, and a preventive maintenance schedule for actuator lubrication, belt tension checks, and control software updates. Schedule a CMC stabilizer and thruster health check and our team will deliver an on-site technician and fixed-price repair quote within 48 hours of onboard assessment.

Marine Project provides expert service for Condaria air conditioning systems across Montenegro and the Adriatic, directly resolving temperature spikes, chiller circulation pump faults, and reduced cooling capacity at your berth or yard. Our experienced HVAC technicians perform comprehensive dockside maintenance for custom-built Condaria chilled water plants, executing compressor overhauls including valve plate and piston ring replacement, fan coil cleaning and condensate drain verification, chilled water pump seal and bearing inspections, and expansion tank pressure checks using Condaria-specified refrigerants and service protocols.

We carry a comprehensive inventory of Condaria-specific components including pump seals, compressor gasket kits, fan motors, and temperature sensors, enabling most interventions to be completed within a single site visit without removing large chiller units or draining entire water loops. This mobile approach eliminates workshop logistics and reduces system downtime, while our performance verification includes chilled water delta-T measurements, compressor amp draw analysis, and circulation pump flow rate testing to restore stable, quiet climate control across all guest areas. Each service concludes with a detailed operating log, pressure and temperature chart, and a preventive maintenance schedule for coil cleaning, filter changes, and water treatment checks. Schedule a Condaria system audit and our team will provide a diagnostic report and fixed-price repair proposal within 48 hours of onboard assessment.

Marine Project Condaria HVAC Systems delivers comprehensive climate control solutions tailored specifically for the demanding Mediterranean maritime environment, ensuring optimal onboard comfort regardless of external conditions. Our core service encompasses the full spectrum of air conditioning, heating, ventilation, and precise temperature control, all executed through our specialized mobile service teams that operate directly at your berth across major Mediterranean ports to minimize vessel downtime.

Operating with a 24/7 availability commitment, we provide rapid-response diagnostics, emergency repairs, and scheduled maintenance for all major HVAC system brands, ensuring your crew and passengers experience consistent, reliable climate control during every voyage. Our technicians utilize advanced diagnostic equipment and carry extensive spare parts inventories to resolve complex temperature management issues on the first visit, from routine filter changes to complete system overhauls, all while adhering to strict maritime safety and environmental standards. With Condaria, you secure uninterrupted thermal comfort through a partnership that prioritizes proactive support and rapid on-site intervention, keeping your vessel’s climate systems performing at peak efficiency throughout the challenging Mediterranean season.

Marine Project provides expert service for Cruisair marine air conditioning systems across Montenegro and the Adriatic, directly resolving AC compressor start failures, pressure errors on SMX displays, and insufficient cooling at your berth or yard. Our skilled HVAC technicians perform fast mobile dockside troubleshooting for direct-expansion units, SMX control systems, and tempered water setups, executing compressor start capacitor and relay testing, refrigerant leak detection, expansion valve calibration, seawater flow verification, and control board diagnostics using Cruisair-specific tools and refrigerants.

We carry Cruisair-specified spare parts including start capacitors, pressure transducers, fan motors, and SMX keypads, enabling most repairs to be completed within a single site visit without removing units or disconnecting chilled water circuits. This dockside service eliminates workshop transport and reinstallation costs, while our performance verification includes temperature differential measurements, compressor amp draw checks, and control interface response testing to restore quiet, efficient cabin climate. Each service concludes with a detailed operating pressure chart, error code log, and a preventive maintenance schedule for coil cleaning, filter replacement, and seawater strainer inspection. Schedule an AC system evaluation and our team will deliver a diagnostic report and fixed-price repair quote within 24 hours of onboard assessment.

Marine Project Cruisair marine air conditioning service delivers specialized repair, maintenance, and diagnostics for the full Cruisair product range from self-contained units and split systems to modular chilled-water plants directly at your berth via fully equipped mobile teams . As a Dometic brand, Cruisair remains a benchmark in the marine HVAC industry, renowned for durable, reliable self-contained and chilled water systems that provide quiet, efficient temperature regulation on countless yachts worldwide . Our factory-trained technicians use only genuine Cruisair/Dometic parts and follow manufacturer-approved protocols, ensuring every repair meets original equipment standards . We operate with 24/7 emergency response to minimize guest discomfort and operational downtime, delivering transparent upfront pricing and fast, reliable solutions that restore your system to peak performance so you can cruise with confidence .

Marine Project offers comprehensive, certified engine and generator service for all Cummins marine propulsion setups, including QSB, QSC, and QSM series, directly at your berth or yard across Montenegro and the Adriatic. Our highly-trained technicians perform routine interval checks, common rail diagnostics with Cummins Insite™ software, injector coding, turbocharger balancing, and full in-situ overhauls of cylinder heads, liners, and bearing assemblies using genuine parts without removing engines from their mountings.

We carry a substantial inventory of Cummins service components including sensors, gasket kits, fuel injectors, and electronic control modules, enabling major interventions to be executed on-site while eliminating crane lifts, transport logistics, and extended yard stays. This mobile approach reduces propulsion downtime and preserves factory warranties, while our post-overhaul sea-trial and load-bank testing validate rated horsepower, torque delivery, and fuel efficiency against Cummins acceptance standards. Each service concludes with a comprehensive performance report, wear measurement log, and a predictive maintenance schedule for critical components including aftercoolers, seawater pumps, and fuel filters. Contact our team for a Cummins propulsion assessment, and we will provide a detailed scope of work and fixed-price proposal within 72 hours of onboard inspection.

Marine Project delivers specialized Cummins generator services, advanced electronic diagnostics, and 24/7 mobile support directly to your berth across Montenegro and the Adriatic, resolving power loss, voltage fluctuations, and starting faults on Cummins Onan GenSets without yard relocation. Our certified engineers isolate fuel system blockages, alternator excitation issues, and cooling circuit failures using Cummins-specific diagnostic interfaces and genuine service parts, executing injector testing, governor recalibration, and heat exchanger cleaning within a single mobilization.

We carry a comprehensive inventory of Cummins components including sensors, voltage regulators, impellers, and control boards, enabling rapid restoration of stable auxiliary power while eliminating towing costs and workshop delays. This dockside approach reduces system downtime and preserves warranty compliance, while our load-bank tests verify voltage and frequency stability, automatic start/stop sequencing, and protective alarm functionality under full-rated demand. Each service concludes with a detailed fault-log report, performance curve, and a scheduled maintenance timeline for filter changes, coolant analysis, and belt replacements. Schedule a Cummins generator health check and our team will provide an on-site technician and fixed-price repair quote within 24 hours of your call.

Cummins Yacht engine overhauls and maintenance. Emergency repairs anytime. Marine Project Yacht Service. We provide complete repairs, maintenance, and sales of engines, generators, and yacht systems from brands like Cummins, performed either at your berth through our mobile service team or in our workshop for larger jobs. Our stock of genuine parts and our factory-trained technicians ensure fast diagnostics and reliable fixes on site.

Cummins Service Available 24/7, we offer emergency breakdown support alongside scheduled servicing, with upfront cost estimates and clear timelines for every job. Whether we repair, exchange, or supply a new unit, our goal is to minimize your downtime and keep your systems running safely.

Marine Project provides professional service for CZone digital switching and circuit breakers across Montenegro and the Adriatic, directly resolving digital switching dropouts, network bus errors, and display interface faults at your berth or yard. Our certified marine electricians perform diagnostic fault tracing using CZone Configuration Tool software, executing CAN-bus termination verification, power distribution module testing, custom load group programming, and full system integration with Raymarine, Simrad, or NMEA 2000 networks without removing panels or rewiring entire harnesses.

We carry CZone-specific components including contactors, interface modules, and circuit breaker units, enabling rapid rectification of most faults within a single site visit while avoiding workshop transport and extended electrical downtime. This mobile approach ensures reliable remote switching and circuit protection, while our post-service functional tests verify manual and automated load control, alarm response, and network communication integrity across all connected displays. Each intervention includes a complete system backup, updated configuration file, and a preventive maintenance schedule for terminal checks and firmware updates. Arrange a CZone system audit and our team will deliver a diagnostic report and fixed-price repair proposal within 48 hours of onboard assessment.

Marine Project provides expert service for Dometic marine air conditioning systems across Montenegro and the Adriatic, directly resolving insufficient cooling, high-pressure trip errors, and poor airflow at your berth or yard. Our skilled HVAC technicians perform rapid mobile interventions for chillers, self-contained units, and air handlers, executing refrigerant circuit diagnostics, condenser and evaporator coil cleaning, expansion valve calibration, seawater pump flow verification, and electrical contactor testing entirely on board using Dometic-specified tools and refrigerants.

We carry Dometic-specific spare parts including pressure switches, fan motors, thermostats, and pump impellers, enabling most repairs to be completed within a single site visit without removing bulky units or disconnecting chilled water loops. This dockside service eliminates workshop transport and reinstallation costs, while our performance verification includes temperature differential measurements, compressor amp draw checks, and noise-level assessments to restore quiet, efficient cooling. Each service concludes with a detailed operating pressure chart, airflow log, and a preventive maintenance schedule for filter changes, coil sanitation, and seawater strainer cleaning. Schedule an AC system evaluation and our team will deliver a diagnostic report and fixed-price repair quote within 24 hours of onboard assessment.

Marine Project DOMETIC service delivers specialized repair, maintenance, and troubleshooting for all Dometic marine HVAC systems from self-contained units to complex chilled-water plants—directly at your berth anywhere along the coast. Our mobile teams are fully equipped with genuine Dometic parts, diagnostic tools, and refrigerant handling certifications, ensuring we resolve faults on-site without the need for yard haul-outs or system removals wherever possible.

We operate around the clock with 24/7 emergency response, minimizing guest discomfort and downtime for your yacht’s operations. Every intervention follows Dometic’s original service protocols, backed by factory-trained technicians who understand the full Dometic portfolio (Cruisair, Marine Air Systems, and Chiller ranges). From software recalibration and compressor swaps to seawater circuit cleaning and complete system pressure testing, we deliver fast, reliable fixes with transparent upfront pricing—so you can sail with confidence, knowing your climate control is in expert hands.

Marine Project provides complete service for Dometic marine refrigerators, freezers, and portable cooling boxes across Montenegro and the Adriatic, directly resolving drawer fridge breaker trips, rising cabinet temperatures, and electronic thermostat errors at your berth or yard. Our skilled refrigeration technicians perform fast mobile dockside care including compressor start relay and overload testing, door seal leak detection and replacement, electronic control board diagnostics, and refrigerant charge verification using Dometic-specified tools and refrigerants, all executed on board without food spoilage or unit removal.

We carry Dometic-specific spare parts including thermostats, fans, start capacitors, and seal gaskets, enabling most repairs to be completed within a single site visit while avoiding workshop transport and extended cooling downtime. This mobile approach eliminates costly disassembly and logistics, while our performance verification includes pull-down time measurement, cyclic run-time analysis, and amp draw checks to confirm factory-specified cooling performance and energy efficiency. Each service concludes with a detailed service log, system pressure chart, and a preventive maintenance schedule for condenser cleaning and door seal inspection. Schedule a refrigeration system audit and our team will provide an on-site technician and fixed-price repair quote within 24 hours of your call.

ECHOTec Watermakers provides specialized desalination solutions for both marine vessels and coastal residences, delivering reliable freshwater independence through rugged reverse osmosis systems built for harsh offshore conditions and saltwater intrusion challenges. MARINE PROJECT delivers certified Echotec watermaker service and repair, with skilled technicians handling installation, preventive maintenance, diagnostics, membrane cleaning, pump and valve servicing, control unit calibration, and emergency onboard support for all Echotec models.

The company offers flexible service delivery at your berth or through a mobile team dispatched directly to your yacht, often arriving within hours. Using genuine Echotec components and manufacturer-approved methods, MARINE PROJECT ensures reliable performance, long service life, and consistent freshwater supply. Their technicians work to superyacht standards with rapid response and full workshop support, backed by 24/7 availability for urgent repairs and technical assistance across the Balearics.

Marine Project provides expert Echotec watermaker services, diagnostic repairs, and routine maintenance across Montenegro and the Adriatic, directly resolving low water production, feed pump leaks, and pressure fluctuations at your berth or yard. Our skilled marine technicians perform prompt dockside support for belt-driven, engine-driven, and AC/DC driven Echotec desalination systems, executing membrane cleaning and replacement, high-pressure pump seal and valve servicing, feed pump impeller and mechanical seal inspection, and electronic control unit recalibration using Echotec-specific diagnostic tools and genuine service kits.

We carry a full inventory of Echotec components including membranes, pressure vessels, seals, and sensors, enabling most interventions to be completed within a single mobilization without unit removal or workshop transport. This mobile approach reduces system downtime and eliminates logistics costs, while our commissioning protocols verify product water TDS below 500 ppm, operating pressure stability, and fully automated start/stop cycling to factory specifications. Each service includes a detailed performance curve, component wear assessment, and a preventive maintenance schedule for pre-filter changes, membrane flushing, and feed pump servicing. Schedule an Echotec system audit and our team will provide a diagnostic report and fixed-price repair quote within 48 hours of onboard inspection.

Marine Project delivers specialized Fischer Panda marine generator service, inverter diagnostics, and mobile dockside repairs across Montenegro and the Adriatic, targeting frequency errors and cooling circuit warnings directly at your berth. Our certified technicians focus exclusively on 100% liquid-cooled Fischer Panda GenSets, performing rapid onboard interventions that restore stable AC output and eliminate electrical blackouts without yard relocation.

We carry comprehensive diagnostic equipment and common replacement parts for all Fischer Panda models, enabling same-day fault isolation and component-level rectification of inverters, control boards, and raw-water cooling paths. This dockside capability reduces system downtime to hours rather than days, while our proactive calibration routines prevent recurring alarms and extend service intervals. You receive a detailed fault-log report and verified load-test results upon completion, ensuring full operational confidence before your next passage. Request a mobile service slot and our team will respond with an on-site ETA within four hours of your call.

Fischer Panda Generator Service. We provide complete repairs, maintenance, and sales of engines, generators, and yacht systems from brands like Fischer Panda, performed either at your berth through our mobile service team or in our workshop for larger jobs. Our stock of genuine parts and our factory-trained technicians ensure fast diagnostics and reliable fixes on site.

Available 24/7, we offer emergency breakdown support alongside scheduled servicing, with upfront cost estimates and clear timelines for every job. Whether we repair, exchange, or supply a new unit, our goal is to minimize your downtime and keep your systems running safely.